Installing The Beltclip; Headset Installation - Uniden EXI3226 Owner's Manual

note
Use only Uniden HS910
headset specifically
designed for Uniden
phones.
[ 46 ] A D D I T I O N A L I N F O R M A T I O N

Installing the Beltclip

To attach the beltclip
Insert the beltclip into
the holes on each side
of the handset. Press
down until it clicks.

Headset Installation

Your phone may be used with an optional headset, the Uniden
HS910. To use this feature, insert the headset plug into the
headset jack. Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts
Department or visiting the web site. See QUICK REFERENCE
GUIDE on page 3.)
If you are using an optional headset, you must still use the
handset keypad for phone operations.
To remove the beltclip
Pull both sides of the
beltclip to release the
tabs from the holes.
www.uniden.com