Using The Caller Id List - Uniden EXI3226 Owner's Manual

Using the Caller ID List

Calling a Caller ID name/number
You can place a call from the Caller ID list. The EXI3226 stores up to
80 messages.
1) Press cid/menu/hold. The Caller ID
summary screen shows the number
of new callers and total number
of calls.
2) Use or #/
/tone/
*
3) Press /conf to scan forward.
Press /int'c to scan backwards through the list.
4) Select the name/number that you
would like to dial.
5) Press line 1 or line 2. The number
automatically dials.
Long Distance calls and Area Cord Setting/Cancellation
Pressing 1 while the incoming Caller ID information is displayed (in step 3)
will place the prefix " " in the display to setup for a long distance call.
Pressing 3 will set or cancel an area code setting.
www.uniden.com
to select " " or " " Caller ID.
C A L L E R I D F E A T U R E S
note
• In Caller ID
operation, if no key is
pressed for more than
30 seconds, an error
tone sounds and the
telephone returns to
the standby mode.
• If a call comes in via
a telephone system
that does not offer
Caller ID service, no
information is stored.
• Each message can be
up to 15 characters
for the phone number
and the name.
• The number of calls
from the same Caller
ID appears next to
the received time.
Once you view the
new calls, the number
will disappear.
[ 41 ]