Uniden EXI3226 Owner's Manual page 14

Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly
to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location,
• Try to mount your phone within 6-10 feet of a working phone jack to avoid
• Make sure the wall material is capable of supporting the weight of the base
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
1) Insert two mounting screws into the wall, (with
2) Set the retainer clip if necessary.
3) Refer to steps 1 through 8 on page 13 to mount
[ 14 ] [ 14 ] G E T T I N G S T A R T E D
that could cause a hazard when inserting screws into the wall.
excessive cord lengths.
and handset.
suitable for the wall material where the base unit will be placed.
their appropriate anchoring device), 3-15/16
inches apart. Allow about 1/8 of an inch
between the wall and screwheads for mounting
the phone.
the telephone.
www.uniden.com