Uniden EXI3226 Owner's Manual page 42

note
If you select " ", then
the Caller ID screen
returns.
[ 42 ] C A L L E R I D F E A T U R E S
Storing a Caller ID number in a memory location
1) Press cid/menu/hold. The Caller ID
summary screen shows the number
of new callers and total number
of calls.
2) Use /tone/ or #/
*
3) Press /int'c or /conf to find the name/number that you would like
to store.
4) Press memory to store the
selected message.
The following screen appears:
5) The "
the number (01-30) to select a blank memory location where you would
like to store the number.
(If you want to replace an existing number with the Caller ID number, skip
to step 7).
6) Press select/vol/ring. A confirmation tone sounds. The number is programmed.
7) If you choose to replace an
existing number with the Caller ID
number, press select/vol/ring.
The following screen appears:
8) Use the /int'c to move the cursor to "
A confirmation tone sounds and the number is programmed.
to select " " or "
" screen appears. Use the
" Caller ID.
/int'c and /conf, or enter
". Press select/vol/ring.
www.uniden.com