Uniden EXI3226 Owner's Manual page 17

To Enter Your Area Code
If you enter a 3-digit area code number in the "
local area code does not appear in the Caller ID messages. Do not program this
option, if your calling area requires 10-digit dialing. When reviewing Caller ID
messages, you will see only the local seven digit number. For calls received
from outside your local area code, you will see a full 10-digit number.
1) When the phone is in the standby
mode, press and hold cid/menu/hold
until the Caller ID setting screen
appears.
2) Press /int'c or
3) Press #/ .
4) Press /int'c or
5) Press select/vol/ring.
6) Use the dial buttons (0 - 9 ) to
enter the 3-digit area code.
7) Press select/vol/ring. A tone sounds and the displayed area code is entered.
8) Press cid/menu/hold to complete the setting. Or return the handset to the
base unit. The handset returns to standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use the
note
delete/flash and number keypad to enter the new area code.
Then press select/vol/ring. To complete the setting, press
cid/menu/hold or return the handset to the base unit.
www.uniden.com
/conf to select "
/conf to select "
" option, your
" or " ".
".
note
If your calling area
requires 10-digit
dialing, do not program
this option.
G E T T I N G S T A R T E D [ 17 ]