INNOVAPLAS WALK WAY Manual

WALK WAY WITH CLASSIC 6003
Contents of Accessory box
SCREW BAG 140-061
x4 x4 x4 x8 x2
x18
Do not dive or jump from the step or ladder.
Use BATTERY operated tools to avoid electric shocks.
Install step on flat surface, following the manufacturers'
instructions .
Remove step from pool during freezing climate season.
Manufacturer cannot be held responsible for injuries caused
by abusive use of product.
Ask your city about specific regulations that apply to your
above-ground pool and ladder.
REV: 22/02/11
PN: 110-107
Contents of ladder box SKU # 6003
SCREW BAG 140-058
x4
x2
x1
x4
x2
x2
x2
WARNING
x2
x2
x2
x2 x18 x2 x2
CABLE LOCK
***PADLOCK REQUIRED
x2
Security strap
A
1) Flip the Walk Way
so that the steps
are directly facing
the ground.
2) Place the
support tube,
one side at a time,
in the pockets located
in the bottom lip.
3) Flip the step back
to its original usage
position.
4) Secure the support
tube to the step with
the screws provided.
x2
Walk Way Step
x2
Required tools
A weather resistant padlock is
recommended.
Maximum functional
width is 1/4 inch.
Sand
(Not included)
(not included)
PG. 1