Advertisement
Quick Links
BILTMOR 5001 WITH CLASSIC LADDER 6003
Contents of the ladder box SKU # 6003
SCREW BAG 140-058
x2
x2
x18
x2 x2
Security Strap
CABLE LOCK
***PADLOCK REQUIRED
x2
Do not dive or jump from step or ladder.
Use BATTERY operated tools to avoid electric shocks.
Install step on flat surface, following the manufacturers
instructions.
Remove step from pool during freezing climate season.
Manufacturer cannot be held responsible for injuries caused
by abusive use of product.
Ask your city about specific regulations that apply to your
above-ground pool and ladder.
370 Lajeunesse St,
St-Jérome (Québec),
Canada J7Y4E5
Contents of the Biltmor box SKU # 5001
x2
x2
x2
x2
WARNING
x4
x2
x2
x2
x4
A
x6
x6
x6
Sand
SCREW BAG 140-020
x6
x6
x6
x16
Required tools and supplies
A weather resistant padlock is
recommended.
Maximum functional
width is 1/4 inch.
1) Assemble the two main modules with the six
screws, nuts and washers provided.
2) Snap the door between the top and bottom
modules within the slots provided.
REV. 28/10/10
PN: 110-097
(not included)
(not included)
PG. 1
Advertisement
Related Manuals for INNOVAPLAS BILTMOR 5001
Summary of Contents for INNOVAPLAS BILTMOR 5001
- Page 1 BILTMOR 5001 WITH CLASSIC LADDER 6003 Sand (not included) Contents of the ladder box SKU # 6003 Contents of the Biltmor box SKU # 5001 SCREW BAG 140-058 SCREW BAG 140-020 x2 x2 Security Strap CABLE LOCK ***PADLOCK REQUIRED WARNING...
- Page 2 1) Insert the four posts into the post ends and secure them in place with the screws provided. 1) Snap the four post ends into the step making sure 2) Insert the platform over the 2 rear that the cylindrical part is posts.
Need help?
Do you have a question about the BILTMOR 5001 and is the answer not in the manual?
Questions and answers