INNOVAPLAS THE TUX Assembly Instructions

THE TUX
Contents of accessory box
SCREW KIT 140-0017
x2
x1 x3
x3
Install the step on a flat surface.
Do not jump or dive from the step.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer's instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
WARNING
2257 route 139
Drummondville, Québec
J2A 2G2
WWW.INNOVAPLAS.COM
INGROUND POOL STEP
Step Shell
REV. 14/01/2016
Sand
Required tools (not included)
Use a cordless drill
with a 5/16" drill bit.
.
MANUFACTURER WARRANTY
1 year on pool step.
1 year on hardware.
PN: 110-0022
(not included)
Use 7/16"
wrench
PG:1