Additional Information; Changing The Digital Security Code - Uniden EXA2950 Owner's Manual

If the handset battery
pack is completely
discharged or the battery
pack is removed, the
digital security code will
be lost. If this happens,
a new security code is set
automatically next time
the battery pack is
charged.
[ 34 ] A D D I T I O N A L I N F O R M A T I O N

Changing the Digital Security Code

The digital security code is an identif ication code used to connect the handset and
the base unit. Normally, setting the code is not necessar y.
The f irst time you charge your handset, the security code is automatically set. (See
"About the digital security code", page 4.)
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
1) Remove the handset from the base unit. Press and hold p p a a g g e e on the base.
2) The handset is emitting the paging sound. While holding p p a a g g e e for at least 3
seconds, place the handset on the base unit. The paging sound stops.
Leave the handset on the base for more than 5 seconds or until the s s t t a a t t u u s s LED
stops flashing. A new random security code is set.