Contents 7 Product information 1 Important Safety 8 Troubleshooting 2 Your clock radio 9 Notice Introduction What's in the box Overview of the clock radio 3 Get started Install batteries Connect power Set time Turn on 4 Listen to DAB+ radio Tune to DAB+ radio stations Store DAB+ radio stations automatically 5 Store DAB+ radio stations manually...
1 Important • Install all batteries correctly, + and - as marked on the unit. • Remove batteries when the unit is not used for a long time. • The battery shall not be exposed to Safety excessive heat such as sunshine, fire or the like.
Overview of the clock radio Congratulations on your purchase, and • Turn on or switch to standby. welcome to Philips! To fully benefit from the PRESET / SET TIME support that Philips offers, register your product • Store radio stations in memory.
3 Get started Always follow the instructions in this chapter in sequence. Install batteries The batteries can only back up clock and alarm settings. Caution • Risk of explosion! Keep the batteries away from heat, sunshine or fire. Never discard batteries in fire. •...
4 Listen to DAB+ radio • No DAB+ radio station is stored to presets during this process. • New stations and services will be added in the DAB+ broadcast. To make new DAB+ stations and services available, perform a full scan regularly. Tune to DAB+ radio stations Store DAB+ radio stations Press...
5 Listen to FM radio • Dynamic Label Segment (DLS) • Signal strength • Program type (PTY) • Ensemble Name Note • Channel and frequency • Signal error rate • Keep the clock radio away from other electronic devices • Bit rate and audio status to avoid radio interference.
Store FM radio stations manually Use FM menu In FM tuner mode, press and hold MENU / Note INFO for more than 2 seconds to access the FM menu. • You can store a maximum of 20 FM radio stations. Press to scroll through the menu options:...
6 Other features Snooze the alarm When the alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing 9 minutes later. Set alarm time Set sleep timer Set alarm This clock radio can switch to standby mode automatically after a preset period. Note •...
Page 10
Amplifier requesting service. If the problem remains Rated Output Power 1W RMS unsolved, go to the Philips webpage (ww.philips. com/support). When you contact Philips, make sure that the device is nearby and the model Tuner number and serial number are available.
Page 11
Directive 2014/53/EU. You can find the Declaration of Conformity on www. philips.com/support. This product complies with the radio interference requirements of the European Community. This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
Need help?
Do you have a question about the 3000 Series and is the answer not in the manual?
Questions and answers
turn off alarm
To turn off the alarm on the Philips 3000 Series clock radio, press the corresponding AL1 or AL2 button.
This answer is automatically generated
I CANNOT SET TIME