• Dynamic Label Segment (DLS)
• Signal strength
• Program type (PTY)
• Ensemble Name
• Channel and frequency
• Signal error rate
• Bit rate and audio status
• Time
• Date
Use DAB+ menu
1
In DAB mode, press and hold MENU / INFO for
more than 2 seconds to access the DAB+ menu.
2
TUN
Press
to scroll through the menu
options:
• [Scan]: scan all the available DAB+ radio
stations.
• [Manual]: tune to a specific channel/
frequency manually and add it to the
station list.
• [DRC]: add or remove a degree of
compensation for the differences in the
dynamic range between radio stations.
• [Prune]: remove all the invalid stations
from the station list.
• [System]: adjust system settings.
3
To select an option, press SELECT.
4
Repeat steps 2-3 if any sub-option is available
under an option.
[System]
• [Reset]: reset all the settings to factory default.
• [SW VER] (software version): know the
software version of the unit.
• [Language]: set system language (English
/ Deutsch / Itliano / Français / Norsk /
Nederlands).
Note
•
If no button is pressed within 15 seconds, the menu
will exit.
EN
6
5 Listen to FM radio
Note
•
Keep the clock radio away from other electronic devices
to avoid radio interference.
•
For better reception, fully extend and adjust the position
of the FM antenna.
Tune to FM radio stations
1
Press
to turn on the clock radio.
2
Press FM / DAB repeatedly to select FM
radio.
3
Press and hold
TUN
seconds.
» The clock radio tunes to a station with
strong reception automatically.
4
Repeat Step 3 to tune to more radio stations.
To tune to a station manually:
In FM tuner mode, press
to select a frequency.
Store FM radio stations
automatically
In FM tuner mode, press and hold SCAN for
more than 2 seconds.
» The unit stores all the available FM radio
stations automatically and broadcasts the
first station.
for more than 2
TUN
repeatedly