Contents Important safety instructions Hearing Safety General information 2 Your True wireless earphones What's in the box Other devices Overview of your True wireless earphones 3 Get started Charge the battery Pair the headphones with your Bluetooth device for the st time 6 4 Use your headphones Connect the headphones to your Bluetooth device...
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat Do not drop your headphones. Hearing Safety Headphones shall not be exposed to dripping , splashing water. Do not allow your headphones to be submerged in water.
2 Your True wireless earphones Quick start guide Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips o ers, register your product at www.philips.com/welcome. Global Warranty With this Philips True wireless earphones, you can: •...
Page 5
Overview of your Bluetooth wireless headphones Touch panel 2. LED indicator (headphones) 3. LED indicator (Charging case) 4. Multiple function button 5. LED indicator 6. Type-C charging slot...
3 Get started The charging box serves as a portable backup battery for charging the earpieces. When the charging box is fully charged, it supports 3 Charge the battery times full recharge cycle for the earpieces. Normally, a full charge takes 2 hours (for the earpieces or charging box) by USB cable.
Turn on the Bluetooth function If you have another Bluetooth device of your Bluetooth device, select that you want to pair with the earpieces, Philips TAT3216. make sure the Bluetooth function in any Enter the earpieces password other previously paired or connected “0000”...
4 Use your Power on/o earpieces Operation Task Touch / Button Open Connect the headphones Turn the charging earpieces on to your Bluetooth device case's cover Turn the close the charging earpieces o Turn on the Bluetooth function of case's cover your Bluetooth device.
LED indicator status How to wear Headphones Indicator status The earpieces are Blue LED ashes connected to a for 1 second Bluetooth device. The earpieces are The blue & white ready for pairing LED ash alternately The earpieces are If no connection on but not can be made after connected to a...
On your Bluetooth device, go to the Bluetooth menu and remove Philips TAT3216 from the device list. Bluetooth device. Put both headphones back to charging case and open charging case cover.
6 Technical data Earpieces Note Music time: 6 hours (additional 18 If safety relevant, the following information wiht charging case) should be included as far as applicable: Talk time: 5 hours (additional 15 hrs • minimum distances around the apparatus with charging case) for sufficient ventilation;...
2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an o cial collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate...
frequency energy and, if not installed Compliance with EMF and used in accordance with the instruction manual, may cause harmful This product complies with all applica- interference to radio communications. ble standards and regulations regarding However, there is no guarantee that exposure to electromagnetic elds.
Page 14
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Trademarks Bluetooth The Bluetooth word mark and logos ® are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trade- marks and trade names are those of their respective owners.
(see ‘Technical data’ on page Bluetooth function of any previously 10). connected Bluetooth devices. • On your Bluetooth device, delete “Philips TAT3216” from the Bluetooth list. • See "Factory reset the headset" The Bluetooth device cannot nd the headphones.
Page 17
Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product.