Customizing The Display; Function 01P Backlight Brightness; Function 02P Unit Of Measure; Function 03P Battery Voltage - aventon PACE 350 Owner's Manual

CUSTOMIZING THE DISPLAY

You can use the settings features of the display to customize the
Pace 350 for your use. To enter the "Settings" mode, hold the "U"
and "D" buttons at the same time for 2 seconds.
You can customize 5 out of the 6 different functions on the
display. Tap the "M" button to move from function to function, and
use the "U" and "D" arrows to adjust each to your preferences.
When you are finished, press and hold the "M" button to
save your changes. Note: The system will save your changes
automatically after 8 seconds.
FUNCTION 01P - BACKLIGHT BRIGHTNESS
You can control how bright you'd like the display backlight
to be. 1 being the dimmest and 3 is the brightest.
FUNCTION 02P - UNIT OF MEASURE
You can toggle between miles or kilometers, based on your
location and preference.
FUNCTION 03P - BATTERY VOLTAGE
This function sets the battery voltage of the system. On
the Pace 350, this function is locked at 36V to match the
battery and motor, and cannot be changed.
5 PACE 350 OWNER'S MANUAL