Getting Started - aventon PACE 350 Owner's Manual

GETTING STARTED

The Pace 350 is operated using the control pad on the
handlebars. The control pad is located near the left-hand brake
lever.
First, tap the power button on the battery to turn on. The current
charge level will be temporarily displayed on the LEDs (4 = full, 1
= near empty), then one green LED to show the battery is turned
on. Next, press and hold the "M" button on the handlebar controls
to turn on the display. Now, your e-bike is ready to ride. To turn
off, press and hold "M" for 3 seconds.
The Pace 350 ebike offers pedal assist. When using pedal assist,
an electric motor supplements the rider's own effort. To use the
pedal assist, simply start pedaling, then tap the "U" or "D" arrows
to increase or decrease the amount of pedal assist from levels
0-5. Pedal assist will engage at speeds up to 20 MPH.
The Pace 350 ebike is equipped with a throttle, which is mounted
near the rider's left thumb, to propel the bike without pedaling. To
use the throttle, start pedaling (one pedal revolution) then apply
the throttle. Once the bike is moving on throttle power, you can
stop pedaling entirely and use your thumb to control the speed of
the bike. The throttle can propel you at speeds up to 20 MPH.
The motor stops when you: stop pedaling, squeeze the brake
levers, or release the throttle. Simply start pedaling again to re-
engage the motor.
PACE 350 OWNER'S MANUAL 2