Using The Controls - aventon PACE 350 Owner's Manual

USING THE CONTROLS

To turn on your bike, tap the power switch on the battery, then
press and hold the "M" button for 3 seconds. To turn off, press
and hold the "M" button for 3 seconds, then press and hold the
power button on the battery for 2 seconds. The display and
battery have an energy-saving feature, if there is no activity for 10
minutes, they will turn off automatically to preserve battery life.
Tap the "U" or "D" arrows to change the level of pedal assist.
Hold "U" and "M" for 3 seconds to switch between showing real-
time speed, average speed, and max speed.
Tap "M" to toggle between the display of the Odometer, Trip
Distance, Voltage, and Elapsed Time.
Press and hold "U" for 3 seconds to enable the backlight on the
display. Press and hold "U" again for 4 seconds to turn it off.
To enable walk mode, first come to a complete stop and stand
next to the bike. Press and hold "D" for 3 seconds. The bike will
slowly move forward at 3.5 MPH / 6 KPH as long as you hold the
"D" button. This feature is useful for pushing the bike up stairs or
walking through a crowd, where you cannot safely ride.
"Super walk mode" is an even-faster version of walk mode. To
use it, hold the down arrow to engage standard walk mode, then
press the throttle. This is useful on very steep climbs or when
towing a trailer. Use caution with both walk modes.
PACE 350 OWNER'S MANUAL 4