Compatible Bases; Installing & Activating Accessory Handset - Uniden DWX207 User Manual

Compatible Bases

This handset is compatible with Uniden's 1.9 GHz DECT6.0
Expandable phone system: the DECT1500, DECT2000 and
DECT3000 series. Please visit our website at www.uniden.com
for the most up-to-date list of compatible bases.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any
items are missing or damaged, contact our Customer Service
Hotline. See the back cover page for contact information.
• Cordless Handset
• Charging cradle
• AC Adapter (model # PS-0011: Input 120V AC, 60 Hz; Output
19V DC, 100 mA)
• Rechargeable NiMH Battery Pack (model # BT-1008: Capacity
650 mAh, 2.4V)
Activate the Handset
The handset is powered by a rechargeable battery pack already
installed in the handset's battery compartment.
Before charging Before charging
the battery for the the battery for the
first time, push first time, push
the activation the activation
pin, located on pin, located on
the bottom of the bottom of
the handset the handset
(see label with (see label with
instructions). instructions).
Note: Use only the Uniden BT-1008 rechargeable battery pack
supplied with your cordless telephone.
• Belt Clip
• Printed Material
Once you activate Once you activate
the handset, remove the handset, remove
the label. the label.
3