Page 2
Welcome Congratulations on your purchase of the Uniden DWX207 waterproof accessory handset. You can place this fully featured cordless handset anywhere your home has AC power-- even outside by the pool! What Exactly does “Waterproof Handset” Mean? Your handset complies with the JIS7 water submersion specifications.
Important! The DWX207 accessory handset will not operate until it is registered to a Uniden base. This manual describes how to set up your new handset; for more detailed instructions on operating your new handset, please refer to the manual supplied with your base.
Compatible Bases This handset is compatible with Uniden's 1.9 GHz DECT6.0 Expandable phone system: the DECT1500, DECT2000 and DECT3000 series. Please visit our website at www.uniden.com for the most up-to-date list of compatible bases. Installing the Accessory Handset Checking the Package Contents Make sure your package contains the following items.
Charging the Accessory Handset Use only the Uniden PS-0011 AC adapter with the charging cradle. Connect the AC adapter to the Connect the AC adapter to the DC IN 19V jack on the bottom DC IN 19V jack on the bottom...
Notes: • For best results, wipe off dirt or shake water from handset before placing in the charging cradle. • Due to the magnetic inductive charging used with this model the bottom of the handset might be warmer than room temperature when you first remove it from the charging cradle.
What if the display shows REGISTRATION FAILED? Repeat the process starting with step 1. Resetting the Handset If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset.
Note: If the rubber seal appears warn, nicked, or dried out, replacement seals are available through the Uniden Parts Department. See the back cover page for contact information.
Insert the bottom end of the cover into the grooves on the handset and lay the cover over the battery compartment. Tighten the four screws securely. Notes: • If there is any foreign matter on the rubber seal located on the under side of the battery cover, the handset may not be water tight.
Reading the Display Handset ID and banner Number of new Caller ID calls received The ringer off icon indicates that the ringer is turned off. The voice mail icon appears when you have messages waiting in your voice mailbox. The privacy icon appears when the Privacy Mode is turned on.
Using the Four-way Function Key Your handset has a four-way function key that allows you to move the cursor or pointer on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the phonebook.
Page 13
If two letters in a row use the same number key, enter the first letter, then use [right] on the four-way function key to move the cursor to the next position to enter the second letter. For example, to enter the word "Movies": Press [6] once to enter M.
Using Your Accessory Handset Making and Receiving Calls With the earpiece Pick up the handset from the cradle. Make a call Dial the number. Press [ /Flash]. Pick up the handset. (If AutoTalk is on, the phone answers when you pick up the handset from the cradle.) Answer Press [ /Flash].
Using Caller ID and Call Waiting If you subscribe to Caller ID, you can store up to thirty Caller ID numbers in each handset. Caller ID records are stored from newest to oldest. Once your Caller ID list is full and you receive an incoming call, the oldest record will be automatically deleted to make room for the new record.
Using the Phonebook Your handset can store up to seventy names and numbers in your phonebook. When all the phonebook entries are full, you will hear a beep and MEMORY FULL appears. You cannot store any additional names and numbers unless you delete some of the existing ones.
Page 17
Redialing a Number To redial one of the last five numbers dialed on this handset, press [Redial/Pause]. This opens the redial list. Use [ ] and ] to find the number you want to dial, and press [ /Flash] or ] in standby, or press [Menu/Select] during a call.
Page 18
Using Hold, Conference, Transfer and Intercom Put a call on hold Join a call already in progress Transfer a call Cancel a transfer Accept a transferred call Make an intercom page Cancel a page Answer an intercom page Note: When answering a transferred call or an intercom page, if AutoTalk is on, the handset will automatically answer the page when you pick up the handset from the cradle.
Accessing Your Answering System If your base has an answering system, you can use your handset to get your messages and change your answering system setup. The answering system plays your new messages (that you have not listened to yet) first. If you have no new messages, the system plays your old messages.
With normal use, the battery lasts about one year. If the talk time becomes short even after the battery is recharged, please replace the battery. To purchase a replacement battery, contact Uniden’s Parts department (see back cover). /Mute] to dial...
The FCC Wants You To Know Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.
Page 23
The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd. Fort Worth, TX 76155 May be covered under one or more of the following U.S. patents:...