Resetting The Handset; Resetting The Handset Without The Base - Uniden DWX207 User Manual

What if the display shows REGISTRATION FAILED?
Repeat the process starting with step 1.

Resetting the Handset

If you want to register the handset to a different base or replace
a handset with another one, you must first clear the registration
information from the base and the handset.
Press and hold [ ] and [#] for at least five seconds, until the
)
SYSTEM RESET menu appears.
Select the DEREGISTER HS
2)
submenu by pressing [Menu/
Select]. WHICH HANDSET?
appears in the display.
3) Use [
registered from the list, and then press [Menu/Select].
DEREGISTER HS appears.
4) Press [
[Menu/Select]. You will hear a confirmation tone.

Resetting the Handset Without the Base

If the original base this handset was registered to is not
available for some reason (for example, it is lost or somehow
incapacitated), you can still reset the handset and use it with
another base.
Press and hold [ ] and [#] for at least five seconds, until the
)
SYSTEM RESET menu appears.
Press [
2)
then press [Menu/Select]. WHICH BASE? appears.
Press [
3)
to de-register from, and then press [Menu/Select]. BASE
UNAVAILABLE appears.
4) Press [
[Menu/Select]. You hear a confirmation tone, and the
handset deletes its own link to the base without trying to
contact the base.
Note: If the handset is still registered to another base, it searches for
the other base and then returns to standby.
Now you are ready to register the handset to the new base.
] or [ ] to select the handset ID to be de-
] to move the cursor to YES, and then press
] to move the cursor to BASE UNAVAILABLE and
] to move the cursor to the base which you want
] to move the cursor to YES, and then press
6