Advertisement
Q.S. D4 Universal CPU Holder Slide Out
QS-2012639
ITEM
DESCRIPTION
1
CPU Holder Swivel Adjustable Waterloo
HARDWARE KIT QS-HWR303
ITEM
DESCRIPTION
A
Bracket CPU holder UNI WSM 1.61H
B
Screw # 14AB x .625 PPH SMS BLACK
Step 1:
Remove CPU holder and the hardware kit included from the box. Using the six zinc plated wood
screws included in the hardware kit of the CPU holder attach the CPU holder WSM bracket item A
to the underside of your work surface, positioning it so that the CPU holder will not interfere with
other items on the bench.
Step 2:
Attach the CPU holder top slide bracket to the CPU holder WSM bracket item A using four #14AB
screws item B making sure the opening in the front of the slide bracket is toward the front of the
bench. Note: Install all four screws into the holes with equally amount for each screw making sure
screws are all the way in. CPU weight with allow unit to slide back and forward freely.
Step 3:
Slide the CPU holder assembly into the opening in the slide bracket and secure using the plastic
end stop included with the CPU holder hardware. Attach this end stop using the two small black
screws included with the CPU holder hardware. The CPU holder should slide forward and back
smoothly.
QTY
1
QTY
1
4
33
Advertisement
