Advertisement
Step 5:
Attach the add-on top support brackets to the starter uprights by repeating Step 2 above. Be sure
to maintain the same top support bracket height so that the worksurface heights will be the same.
Attach the D/S back panels item 1 to the D/S top support bracket of the starter upright by placing it
over the threaded inserts in the bracket flange and installing 2 each items # B and D into the
inserts. Do not tighten the bolts at this time.
Step: 6
Attach the adder D/S back panels item 1 to the D/S top support brackets of the adder upright by
placing it over the threaded inserts in the bracket flange and installing 2 each items # B and D into
the inserts. Do not tighten the bolts at this time. Repeat this process for as many adder benches
ordered.
11
Advertisement
