Panduit ATLONA AT-UHD-SW-510W Installation Manual
  1. Manuals
  2. Brands
  3. Panduit Manuals
  4. Switch
  5. Atlona AT-UHD-SW-510W
  6. Installation manual

Panduit ATLONA AT-UHD-SW-510W Installation Manual

4k/uhd five-input universal switcher with wireless presentation link
Hide thumbs Also See for ATLONA AT-UHD-SW-510W:
Table of Contents

Advertisement

Quick Links

Download this manual
4K/UHD Five-Input Universal Switcher with Wireless
Presentation Link
AT-UHD-SW-510W
The Atlona AT-UHD-SW-510W is a 5×1 multi-format switcher with wireless presentation
capability. It provides universal BYOD (bring your own device) compatibility with HDMI,
DisplayPort, and USB-C inputs, plus wireless connectivity for mobile devices. The SW-510W
is HDCP 2.2 compliant, and features an HDMI output and a mirrored HDBaseT™ output that
can be used with the Atlona AT-UHD-EX-100CE-RX-PSE HDBaseT receiver. It also includes
automatic input switching and automatic display control capability, both applicable to wired and
wireless source connections. Additionally, the SW-510W can be integrated with an occupancy
sensor to automatically power up the unit and display (available in firmware 1.1 or greater).
This unique multi-format switcher and wireless gateway provides a universal connectivity solution
for presentation devices in a wide range of professional AV applications.
Package Contents
1 x AT-UHD-SW-510W
1 x Captive screw connector, 5-pin
1 x Captive screw connector, 4-pin
2 x Captive screw connector, 3-pin
2 x Wi-Fi antenna modules
1 x USB-C cable, 2 meters
1 x 24 V DC power supply
2 x Mounting plates
4 x Mounting screws
1 x Installation Guide
IMPORTANT: Visit http://www.atlona.com/product/AT-UHD-SW-510W for the latest
firmware updates and User Manual.
1
Installation Guide
AT-UHD-SW-510W

Advertisement

Table of Contents
loading

Related Manuals for Panduit ATLONA AT-UHD-SW-510W

Summary of Contents for Panduit ATLONA AT-UHD-SW-510W

  • Page 1 4K/UHD Five-Input Universal Switcher with Wireless Presentation Link AT-UHD-SW-510W The Atlona AT-UHD-SW-510W is a 5×1 multi-format switcher with wireless presentation capability. It provides universal BYOD (bring your own device) compatibility with HDMI, DisplayPort, and USB-C inputs, plus wireless connectivity for mobile devices. The SW-510W is HDCP 2.2 compliant, and features an HDMI output and a mirrored HDBaseT™...

  • Page 2: Panel Descriptions

    Installation Guide AT-UHD-SW-510W Panel Descriptions USB-C INPUT POWER DISPLAY HDMI 3 HDMI 4 BYOD AT-UHD-SW-510W Front Input Indicators AUDIO RELAY TRIGGER I/O RS-232 WiFi MIRACAST C1 COM C2 Displays the currently selected input. INPUT Press this button to cycle through each input. This button is also used to toggle the IP mode.
  • Page 3 USB-C INPUT POWER DISPLAY Installation Guide HDMI 3 AT-UHD-SW-510W HDMI 4 BYOD AT-UHD-SW-510W Panel Descriptions AUDIO RELAY TRIGGER I/O RS-232 WiFi MIRACAST C1 COM C2 HDBaseT OUT USB-C IN DP IN HDMI IN HDMI OUT DC 24V Rear AUDIO IN Connect a 3.5 mm mini-stereo cable from an analog audio source to this connector.
  • Page 4 Installation Guide AT-UHD-SW-510W RS-232 The AT-UHD-SW-510W provides an RS-232 port which allows communication between an automation system and an RS-232 device. This step is optional. Use wire strippers to remove a portion of the cable jacket. Remove at least 3/16” (5 mm) from the insulation of the RX, TX, and GND wires. Insert the TX, RX, and GND wires into correct terminal using one of the included 3-pin captive screw connectors.
  • Page 5 Installation Guide AT-UHD-SW-510W Relay The AT-UHD-SW-510W provides a RELAY port, allowing the control of screens, curtains, and other devices. Use a 48 V DC relay with no more than 1 A current draw. When the AT-UHD-SW-510W is powered-on or rebooted, C1 and C2 are set to the Normally Open (NO) state.

  • Page 6: Mounting Instructions

    Installation Guide AT-UHD-SW-510W Mounting Instructions The AT-UHD-SW-510W can be mounted in different ways, based on the number of units that are being installed. The AT-UHD-SW-510W can be mounted in a rack or on/under any flat surface. NOTE: AT-UHD-510W-RM rack ears are sold separately. Contact Atlona for more information.
  • Page 7 Installation Guide AT-UHD-SW-510W Dual-unit rack installation Turn both units upside-down on a flat surface, next to each other, as shown. Position the included mounting plates over the holes on the bottom of the enclosure. When attaching mounting plates, the countersink bevels on the mounting plate should face upward.
  • Page 8 Installation Guide AT-UHD-SW-510W Flat surface Turn the unit upside down on a flat surface. Position the included mounting plates over the pre-drilled holes on the bottom of the enclosure. When attaching mounting plates, the countersink bevels on the mounting plates should face upward.

  • Page 9: Installation

    Installation Guide AT-UHD-SW-510W Installation Connect a USB-C cable from a source to the USB-C (1) port. Connect a DisplayPort cable from a source to the DP IN (2) port. Connect up to two UHD/HD sources, using HDMI cables, to the HDMI IN (3) and HDMI IN (4) ports.

  • Page 10: Connection Diagram

    Installation Guide AT-UHD-SW-510W Connection Diagram AT-VGW-250 DI SP W ER IN PU B- C AT-UHD-SW-510W 10 W W -5 D -S A T- AT-UHD-EX-100CE-RX-PSE AT-VTP-800-WH se T Tablet (BYOD) Miracast™ Laptop Laptop UHD/HD Display Laptop IP Configuration By default, the AT-UHD-SW-510W is set to DHCP mode, allowing a DHCP server (if present) to assign the unit an IP address.

  • Page 11: Accessing The Webgui

    Installation Guide AT-UHD-SW-510W Obtaining the IP Address Make sure the unit is powered. Connect a display from the HDMI OUT port on the AT-UHD-SW-510W to a display. NOTE: The HDBaseT OUT port can also be used as an output port. To do this, a compatible receiver, such as the AT-UHD-EX-100CE-TX-PSE, must be connected between the HDBaseT OUT port on the AT-UHD-SW-510W and the HDBaseT IN port on the receiver.

  • Page 12: Troubleshooting

    Installation Guide AT-UHD-SW-510W Troubleshooting Problem Solution The source image is not • Check all cable connections between the AT-UHD-SW- displayed. 510W and the source(s) and display. • Check the input indicators on the front panel to make sure that the correct input is selected. Press and release the INPUT button to cycle through each input.
  • Page 13 Installation Guide AT-UHD-SW-510W Notes...
  • Page 14 Installation Guide AT-UHD-SW-510W Notes...
  • Page 15 Installation Guide AT-UHD-SW-510W Notes...
  • Page 16 Installation Guide AT-UHD-SW-510W Toll free US International atlona.com 877.536.3976 41.43.508.4321 • • © 2019 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.

Table of Contents