Chuango OV6 User Manual page 14

Zone Mode
Armed
Sensors set to Armed Zone are activated when the system is in Away (Full Arm) or
Home Arm (Part Arm) status. We recommend setting window/door sensors to this
zone as they usually secure the perimeter of the house.
Disarmed
Sensors set to Disarmed Zone will not activate the alarm when triggered.
Home
Sensors set to Home Zone are only activated when the system is in Away (Full
Arm) status. During Home Arm mode, these sensors will not be armed and will not
activate the alarm on triggered. We recommend setting PIR motion sensors to this
zone as they usually secure the interior of the house.
24-Hour
Sensors set to 24-Hour Zone will activate the alarm when triggered, regardless of
the alarm status at the time (away or disarmed).
Delay
Sensors set to Delay Zone will work similarly to Armed Zone sensors. However,
these sensors will only activate the alarm after a set alarm delay time* when
triggered.
* Alarm Delay Time: you can set the delay time on the app through [OV6 Settings]-
[Delay Alarm Time].
Note: Optional Smoke, Gas Leakage or Water Flood Sensors are automatically registered as
Instant Alarm Zone Sensors and cannot be changed to other Zone. Any Motion or Door/
Window Sensor paired to the Hub by pressing the Tamper Switch will also register as a 24-Hour
Zone sensor.
11