Testing.the.connection - Uniden DECT1580 User Manual

Testing the Connection
Pick.up.the.handset.from.the.cradle.and.press.TALK/FLASH..You.should.hear.a.dial.tone,.and.the.display.
should.show.Talk.
What.if.I.can't.hear.a.dial.tone?
Check.the.telephone.cord.connection.on.the.base.
What.if.the.display.doesn't.show.Talk?.
• Check.the.battery.pack.connection.in.the.handset.
• Make.sure.the.battery.pack.is.fully.charged..
• Make.sure.the.AC.adapter.cord.is.securely.connected.to.the..
DC IN 9V jack.and.a.standard.power.outlet.
• Try.resetting.the.handset.(see.page.60).
Make.a.quick.test.call,.and.then.press.END.to.hang.up..
What.if.there.is.a.lot.of.static?.
Check.the.sources.of.interference.described.in.Choosing.the.
Best.Location.(see.page.6):.is.the.base.near.any.of.those?
What.if.the.call.doesn't.go.through?
Try.changing.the.dialing.mode.(see.the.next.section).
Note:. Make.sure.you.can.get.a.dial.tone.on.any.accessory.handsets.that.were.packaged.with.your.phone..
11