Installing A Telephone Line Filter Or Dsl Filter; Resetting.the.handset - Uniden DECT1580 User Manual

Installing a telephone line filter or DSL filter

Any.broadband.Internet.service.that.uses.your.telephone.
line.might.interfere.with.standard.phones..The.most.common.
type.of.these.services,.DSL,.often.causes.static.on.your.
telephone. Fortunately, an easy-to-install filter removes this
static.from.the.line..Technicians.who.install.DSL.service.
usually leave several filters for the customers; if you can't
find them, call your DSL provider or look in any electronics
store.
Just plug the DSL filter into the telephone wall jack and then
plug your phone's base into the filter. Make a test call to
make.sure.the.noise.is.gone.
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
• You.lose.a.handset.and.purchase.a.new.one.
• You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
• You.are.unable.to.register.any.handsets.to.the.base.
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as."Handset.#4".but.you.only.have.two.handsets.)
• When.you.are.instructed.to.by.one.of.Uniden's.call.center.representatives.
1) Select.the.base.you.want.to.de-register.the.handset.from.(see.Selecting.the.base.on.page.15).
) Press.and.hold.END.and.# for more than five seconds. Select Deregister HS.
3) Select.the.handset.which.you.are.operating,.and.then.press.MENU/SELECT.
4) The phone will ask you to confirm the deregistration. Select Yes..The.selected.handset.will.clear.its.registration.
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
60
Telephone Telephone
wall jack wall jack
Telephone Telephone
cord cord
DSL filter DSL filter