Table of Contents
Advertisement
3.2) Connecting the insulated flexible hose (
Fully unravel the insulated flexible hose.
Remove caps and connect the female coupler of the insulated
flexible hose to the male coupler (11) of the hydraulic head to
be used.
Before using the pump always check the
integrity of the insulated flexible hose
and the quick couplers.
Connect the male coupler of the
insulated flexible hose to
the female coupler
of the pump.
3.3) Grounding the cutting head
Safety cutting heads are provided with a grounding socket (1).
To ground the cutting head, proceed as follows:
• Using a grounding wire with lug termination
Unscrew knob (2) from the grounding socket (1) of the head.
Connect the terminal of the grounding wire to the socket (1)
using the knob (2), fasten the knob tightly.
Fully unwind the grounding wire and connect it to a grounding system using the clamp.
insulated
flexible hose
grounding *
wire
1
2
Ref. to Fig. 4)
11
2
* purchase separetly
6
Advertisement
Table of Contents
