Finding A Lost Handset; Using Hold, Conference And Transfer; Placing A Call On Hold; Conferencing - Uniden Cordless Telephone User Manual

Finding a Lost Handset
To locate a misplaced handset, press [flash/find handset] key on the base when the phone is in standby. All regis-
tered handsets wilt beep for 60 seconds, and PAGING appears on the handset display. To cancel paging, press any
key on the found handset or press [flash/find handset] key on the base.
Note: If the battery pack is completely drained, the handset will not beep when paging.
Using Hold, Conference and Transfer
Placing a Call on Hold
1) During a call, press [int'com/hold] to place the caller on hold. If you leave a caller on hold for more than ten
seconds, the display screen wilt read, HOLD.
To return to the party on hold, press [C/flash] or [,q_)]on a handset or [,4_)]on the base. The phone will return
to the holding party.
2)
Note:
You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party's line will be discon-
nected and the phone wilt return to standby.
• While a call is on hold, Caller ID and Call Waiting cannot be received.
Conferencing
If you have more than one handset, up to four people can participate in a conference call. A four-way conference call
consists of an outside line, two handsets, and the base speakerphone. You can easily join a call already in progress.
1) Press [€/flash] or [,i_)] on the handset or [,i_)] on the base to join the call.
2) To hang up, return the handset to the cradle or press [,]] on the handset or [,_>)] o n the base. The other party
will still be connected to the call.
42