Uniden Cordless Telephone User Manual page 65

Remotely Operating Your Answering Machine
You can access your answering machine while you are away from home to check, play, delete messages, or even
record a new greeting message or to turn your answering machine on and off.
Note:
• The answering machine wilt only playback messages for four minutes and then it returns to the command-
waiting mode. To continue playing your messages, press [0] then [2] again within 15 seconds.
• If you enter an incorrect security code three times, you will hear a beep and the answering machine will return
to standby.
To operate from a remote location, use any touch-tone telephone and follow these steps:
1) Call your telephone number and wait for the answering machine to answer. If the answering machine is off, it
wilt answer after about 10 rings and series of beeping sounds.
2) During the greeting message (or a series of beeps when the answering machine is off), press [0] and enter
your PIN code within 2 seconds (see "Setting a Security Code or Personal Identification Number (PIN)" on
page 56).
3) The answering machine announces the current time and the number of messages stored in memory. You
hear "To play incoming messages, press zero-two. For help, press one-zero." You wilt hear a beep.
4) Enter a remote command within 15 seconds, each command there after must be entered within 2 seconds.
You may select a command from the following chart:
64