Uniden Cordless Telephone User Manual page 73

Symptom Suggestion
The Caller ID does not • The call was placed through a switchboard.
display. • Call your telephone provider to verify your Caller ID service is current.
There may be a problem with your Caller ID service.
You cannot register the • Charge the battery pack in the handset for 15-20 hours.
handset at the base. • Change the Digital Security Code (see page 70).
• Make sure you have not stored 10 handsets already.
The handset doesn't commu- • Change the Digital Security Code (see page 70).
nicate with other handsets. • Make sure that you have registered all handsets.
An extra handset can't join the • Make sure there are not 2 handsets already using the conference feature.
conversation. • Make sure that another station is not in privacy mode.
The Room Monitor feature • Make sure to place the handset(s) within the range of the base.
does not work. • Make sure that the Room Monitor feature is turned on.
The answering machine does • Make sure the base is plugged in.
not work. • Make sure that the answering machine is turned on.
• Make sure that the message record time is not set to Announce only (see
page 55).
Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief
message.-
. The memory may be full. Delete some or all of the saved messages.
There is no sound on the • Adjust the speaker volume on the base or handset.
base or handset speaker • Make sure the call screen feature is set to on.
during call monitoring or mes-
sage playback.
72