Table of Contents
Advertisement
,
0
InstaIlation- Connecti ngPower
The MC 800 will work with any ship's 12 volt nominal
DC voltage.
(see specifications
for more details)
Connect
the power cable fur-
nished to a DC source capable of supplying
at least 1.0 amperes of
current.
The power leads should normally
be routed to the ship's DC
power distribution
panel (on larger boats) or directly
to the battery
main circuit
breaker (on smaller boats).
Be sure to observe the proper polarity
when connecting
the power.
The red lead wire of the power cable should
be connected
to the
positive
terminal,
and the black
lead should
be connected
to the
negative terminal.
Warning
The indicator unit is protected by an inline 1.0 ampere fuse. To
reduce the risk of fire or electric shock, replace this fuse only with
one of the proper specification.
(D
(D
~
D
(D
(D
- 11 -
Advertisement
Table of Contents
