Sony CDU-541 Interface Manual page 67

Table of Contents

Advertisement

CDU-541 CD-ROM DRIVE SCSI INTERFACE MANUAL
If the track number field is zero or is not valid for the disc inserted the
command will be terminated with a CHECK CONDITION status. The sense key is set
to ILLEGAL REQUEST.
The additional sense code is set to ILLEGAL VALUE IN COB.
Table 5-23: TOe Data Format
==============================================================================
o
I
(MSB)
I
I
-----1---
TOC Data Length
---I
(LSB)
I
1
I
I
-----1-----------------------------------------------------------------------1
2
i
First Track Number
I
-----1-----------------------------------------------------------------------1
3
I
Las t Track Number
I
==============================================================================
TOC Track Descriptor
==============================================================================
o
I
Track Number
I
-----1-----------------------------------------------------------------------1
1
I
Reserved
I
Control
:
-----l----------------------~------------------------------------------------1
2
I
I
-----1---
---I
3
I
I
-----1---
-
CD Address
---I
4
I
I
-----1---
---I
I
I
I
I
5
==============================================================================
The starting track field specifies the starting track number for which the
TOC data will be returned.
The data is returned in contiguous ascending
order.
Valid values for the starting track field are lh to 63h.
A value of
AAh requests that the starting address of the lead out area be returned.
The TOC data returned is a four byte header followed by one or more (up to
100) TOC track descriptors.
The last track descriptor is for the lead-out
area.
The format of the CD Address is determined by the LBAMSF bit in the
CD-ROM parameters page.
See Section 5.3.1.4.
The TOC data length specifies the length in bytes of the available table of
contents data.
The value of TOC data length does not include itself.
The
maximum value is 602d (025Ah).
The first track number field indicates the first track number in the table
of contents.
IMPLEMENTORS NOTE:
A disc may start at any track number.
The track numbers
between the first track number and the last track number are in contiguous
ascending order.
5-45

Advertisement

Table of Contents
loading

Table of Contents