Table of Contents
Advertisement
Person 1
lift handles
Figure 58. Correct placement of hands to lift and move the heat exchanger
72
Rear Door Heat eXchanger V2: Installation and Maintenance Guide
8. When the heat exchanger is in position at the rear of the rack, carefully rest
one corner of the heat exchanger on the floor, and then, stand the heat
exchanger in an upright position. See the illustration for the correct placement
of hands for the three people who are required to lift and move the heat
exchanger in an upright position.
Person 2
lift handles
Person 3
lift points
Advertisement
Table of Contents
