Omcan RS-CN-0271 Instruction Manual page 9

Refrigerated showcases
Hide thumbs Also See for RS-CN-0271:
Table of Contents

Advertisement

BEFORE USE
Plug refrigerator into the 110-120V exclusive socket.
After the refrigerator is running, confirm that air suction/filtration is in order and that it is sufficiently cold.
After checking to make sure the refrigerator is working properly, it may be used.
DIGITAL TEMPERATURE CONTROLLER
FEATURES OF FUNCTION
Small, integrated digital controller, which is applicable to the compressor of 1 Hp.
Main functions are: Temperature Display/Temperature Control/Manual-Automatic /Light Control/Value
Storing/Self-Testing/Parameter Locking.
FRONT PANEL OPERATION
1. Set temperature: Press
store the displayed value. Press
2. If no button is pressed within 10 seconds, the cold-room temperature will be displayed.
3. Lighting: Press
button to activate light in refrigerator; press again to turn off. Manual start/stop defrost:
Press
button and hold for 6 seconds to either defrost or to stop defrost.
4. Refrigeration LED: During refrigeration, the LED is on. When the cold room temperature is constant, the
LED is off. During delay start, the LED flashes.
5. Defrost LED: During defrosting, the LED is on. When it stops defrosting, the LED is off. During the delay of
defrost, the LED flashed.
CAUTION
Minimizing time the time and frequency that the door is open will maintain temperature.
Never block the air outlet and suction to keep the air circulation and refrigeration capability constant.
Do not overfill refrigerator with food, as it will influence the cooling effect. If needed, adjust the rack height
for proper food storage.
Cool down hot food to room temperature before placing inside the refrigerator.
When power supply has been cut off, reduce opening times and maintain cool temperature in refrigerator.
To avoid scalding, never touch the compressor.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly
qualified persons in order to avoid hazard.
button; set temperature will be displayed. Press
button to exit the adjustment and display the cold-room temperature.
9
Operation
or
button to modify and

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RS-CN-0271 and is the answer not in the manual?

Questions and answers

Table of Contents