Omcan RS-CN-0271 Instruction Manual page 5

Storage
Always store refrigerator in a dry place.
Sufficient space
To allow for proper air circulation and increased refrigeration capabilities, the refrigerator must have
at least 3 inches of space between wall and unit.
Proper ventilation
Always place the refrigerator in an area with good ventilation. For first time use, wait at least 2
hours before plugging into wall socket.
Away from heat source
Never place the refrigerator near any type of heat source or in direct sunlight, as it reduces
refrigeration capabilities.
No heavy load
Never put heavy items on top of the refrigerator.
No alterations/tampering
Never tamper with, or make changes to the refrigerator. Changes and add-ons should not be
installed to the inside or outside of the refrigerator.
Stable location
Unpack and place the refrigerator on flat, solid ground.
PREPARATION AND POWER SUPPLY
Power receptacle
No shared power outlets
Refrigerator cable should never share the power outlet with any other appliance, as cable
will overheat and may result in a fire.
Exclusive power socket
Power supply should be 110V, single phase AC with exclusive single
phase three pin outlet and fuse (8A). The power outlet must be in
Ground
Earth bar
close proximity to the ground.
Safety and Warranty
5