Table of Contents
Advertisement
Chapter 4
Windows CE .NET
Remote Display Application
Remote Display Application displays a Windows CE device screen on a
remote desktop. It works with the Windows CE Remote Display Host
application.
Because the connection is over the network, the host machine and
TPC-2006 network functions must work properly. You must execute
Remote Display Host (
must run Remote Display Application on the TPC-2006. In the CE Remote
Display window, click Connect and enter the hostname or IP address.
After successfully establishing the connection, you can see the TPC-2006
display and control it from the host machine.
TPC CE Notepad
TPC CE Notepad is a text editor.
TPC Configurator
TPC Configurator is an integrated utility for configuring the basic
TPC-2006 settings. For more information, refer to
TPC Version Information
TPC Version Information shows the OS version information.
Other Utilities
The following utilities are command line-executed programs without
graphical user interfaces. To execute these utilities, type the command
names and parameters as shown below.
Bright.exe [Level]:
Sets the display brightness level. The parameters are 1 to 10.
Buzzer.exe [frequency] [duration]:
Plays a beep. Use parameters to set the frequency in Hertz and duration in
milliseconds. If you do not use parameters, the default frequency is 350 Hz
and default duration is 30 ms.
TPC-2006 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
) on a remote host desktop. Also, you
cerhost.exe
4-4
TPC
Configuration.
ni.com
Advertisement
Table of Contents
