Installing/Removing Main Memory - Fujitsu D2840 Short Description

Brief description of mainboard

Installing/removing main memory

Technical data
Technology
Total size
Module size
A current list of the memory modules recommended for this mainboard is available
on the Internet at: "http://ts.fujitsu.com/mainboards".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
You may use only unbuffered 1.8 V memory modules without ECC.
DDR2-memory modules must meet the PC2-5300U or PC2-6400U specification.
To simplify equipping, the slots are colour coded.
With a memory configuration of 8 Gbytes, the visible and usable main memory may
be reduced to 7.25 Gbytes (depending on the system configuration).
Channel B
Channel A
Slot to be used
Channel A
Channel B
The installation/removal is described in the "Basic information on mainboard" manual.
4 - English
DDR2 667/ DDR2 800 unbuffered DIMM Module 240-pin; 1,8 V; 64 bit,
without ECC
512 MBytes to 8 GBytes
512, 1024, 2048 or 4096 MBytes per module
Number of memory modules inserted
1
x
A26361-D2840-Z210-1-8N19, edition 1
2
x
x