Installing/Removing The Processor; Technical Data - Fujitsu D2840 Short Description

Brief description of mainboard

Installing/removing the processor

Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.

Technical data

• Intel® Core 2 Quad Q9xxx / Q8xx processors, LGA775 with 1333/1066 MHz FSB
TM
• Intel® Core 2 DUO E8xxx / E6xxx processors, LGA775 with 1333/1066 MHz FSB
TM
• Intel® Core 2 DUO E7xxx / E4xxx processors, LGA775 with 1066/800 MHz FSB
TM
• Intel® Pentium® Dual Core E2xxx/E5xxx Processors, LGA775 with 800 MHz FSB
• Intel® Celeron® Dual Core E1xxx processors, LGA775 with 800 MHz FSB
• Intel® Celeron® 4xx processors, LGA775 with 800 MHz FSB
• compatible with Intel® 06 processors, max. 65W LGA 775 (for D2840)
• compatible with Intel® 06 and 05A processors, max. 95W LGA 775 (for D2841)
• A current list of the processors supported by this mainboard is available on the
Internet at: "http://ts.fujitsu.com/mainboards".
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the processor's operation or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent, on no account insert the processor as it
may be damaged by doing so. Please contact the responsible vendor.
2 - English A26361-D2840-Z210-1-8N19, edition 1