Control Panel Locking; Cooking Advices; Pan Quality; Pan Dimension - BORETTI BIK-38 Operating Instructions Manual

Control panel locking

To avoid modifying a setting of the cooking zones, in particular during cleaning, or to avoid children
accidentally turning on the appliance, the control panel can be locked (with exception to the On/
Off key [ ].
• Locking :
Action
Start
Hob locking
• Unlocking :
Action
Start
Unlocking the hob

Cooking advices

Pan quality

Adapted materials :
steel, enamelled steel, cast iron, ferromagne-
tic stainless-steel, aluminium with ferromagne-
tic bottom.
Not adapted materials :
aluminium and stainless-steel without ferro-
magnetic bottom, cupper, brass, glass, cera-
mic, porcelain.
The manufacturers specify if their products
are compatible with induction technology.
To check if pans are compatible :
• Put a little water in a pan placed on an induc-
tion heating zone set at level [ 9 ].This water
must heat in a few seconds.
• Check if a magnet sticks to the bottom of
the pan.
26
Control panel
Press key [ ]
Press key [ ]
Control panel
Press key [ ]
Press key [ ]
Certain pans can make noise when they are
placed on an induction cooking zone. This noise
doesn't mean any failure on the appliance and
doesn't influence the cooking operating.

Pan dimension

The cooking zones will, to a certain limit, au-
tomatically adapt to the diameter of the pan.
However the bottom of this pan must have a
minimum of diameter according to the corres-
ponding cooking zone.
To obtain the best efficiency of your hob, please
place the pan well in the centre of the cooking
zone.
Display
[ 0 ] or [ H ] on displays
[ 0 ] or [ H ] on displays
Locking light is on
Display
[ 0 ] on displays
[ 0 ] on displays
Locking light is off