Display; Den; Starting-Up And Appliance Management; Before The First Use - BORETTI BIK-38 Operating Instructions Manual

Starting-up and appliance management

Before the first use

Clean your hob with a damp cloth, and then dry
the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the
glass surface.

Induction principle

An induction coil is located under each heating
zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive
currents in the ferromagnetic bottom plate of
the pan. The result is a heating-up of the pan
located on the heating zone.

Starting-up

You must first start-up the hob, then the heating zone :
• Start up / switch off the hob:
Action
To start
To stop
• Start up / switch off a heating zone:
Action
Increase power
Decrease power
Stop
If no action is made within 20 second the electronics returns in waiting position.
Of course the pan has to be adapted:
• All ferromagnetic pans are recommen-
ded (you can verify it with a little magnet):
cast iron and steel pans, enamelled pans,
stainless-steel pans with ferromagnetic
bottoms...
• Excluded are: cupper, pure stainless-steel,
aluminium, glass, wood, ceramic, stone-
ware,...
The induction heating zone adapts automati-
cally to the size of the pan. With a pan with
too small a diameter the induction zone will not
work. This diameter is varying in function of the
heating zone diameter.
If the pan is not adapted to the induction hob
the display will show [ U ].
Control panel
Press key [ ]
Press key [ ]
Control panel
Press key [ + ]
Press key [ - ]
Press simultaneous[ + ] and [ - ]
or press [ - ]

Display

2 x [ 0 ]
nothing or [ H ]
Display
[ 4 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]
D
EN
23