Operation - Husqvarna QC80F Operator's Manual

Hide thumbs Also See for QC80F:
Table of Contents

Advertisement

Available languages

Available languages

maintenance shall not be made
by children without supervision.

OPERATION

• Always use Husqvarna BLi10 or BLi20
batteries.
• Use the battery charger only when the
ambient temperature is between 5 °C (41 °F)
and 40 °C (104 °F).
To charge the battery
CAUTION:
battery, the battery charger and the
terminals on the battery are clean and
1226 - 005 - 18.10.2019
Make sure that the
dry. Do not put the battery in the battery
charger if it is dirty or wet.
1. Connect the battery charger to a power outlet.
The charging LED flashes 1 time.
CAUTION:
battery charger to a power outlet
with the voltage and frequency
specified on the rating plate.
2. Connect the battery to the battery charger.
The charging LED comes on.
3. Remove the battery from the battery charger.
4. Pull the power plug to disconnect the battery
charger from the power outlet. Do not pull the
power cord.
Only connect the
9

Advertisement

Table of Contents
loading

Table of Contents