Installation In A Sliding Sash Window - Beko BEP 09C User Manual

7 Installation instructions (optional)
Window
panel
Foam seal
Mobile type air conditioners (local air conditioners) / User Manual
7.2.2 Installation in a sliding sash
Foam seal A
(adhesive type)
1. Cut the foam seal (adhesive type) to the proper length
and attach it to the window frame. See Fig. 12.
2. Attach the window slider kit to the window stool. Adjust
Fig. 12
the length of the window slider kit according to the
width of window, shorten the adjustable window kit if
the width of window is less than 26.5 inches.
Open the window sash and place the window slider kit
on the window stool. See Fig. 13.
26.5 ~ 48.0
3. Cut the foam seal (adhesive type) to the proper length
and attach it on the top of the window. Shown as in
Fig. 14.
Fig. 13
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and sea
the open gap between the top window sash and outer
window sash. Shown as in Fig. 15.
C
Fig. 14
Fig. 15
window
Note: All the illustrations in this manual
are for explanation purpose only.Your unit
may be slightly different. The actual shape
shall prevail.
19 / 28 EN