Installation In A Double-Hung Sash Window - Beko BEP 09C User Manual

7 Installation instructions (optional)
Foam seal A
(adhesive type)
26.5 ~ 48.0
Window stool
Window stool
Foam seal
18 / 28 EN
7.2.1 Installation in a double-hung
1. Cut the foam seal (adhesive type) to the proper length
2. Attach the window slider kit to the window stool. Adjust
Fig. 8
Window kit
3. Cut the foam seal (adhesive type) to the proper length
Fig. 9
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and seal
Window kit
Fig. 10
Fig. 11
Mobile type air conditioners (local air conditioners) / User Manual
sash window
and attach it to the window stool. Fig. 8
the length of the window slider kit according to the
width of window, shorten the adjustable window kit if
the width of window is less than 26.5 inches Open the
window sash and place the window slider kit on the
window stool. Fig. 9
and attach it on the top of the window. Shown as in
Fig. 10
the open gap between the top window sash and outer
window sash. Shown as in Fig. 11.