Re-Transfer Settings; Bend Remedy; Ink Settings; Other Settings - Magicard Prima 3 XID570ie Driver Manual

5.1.1. Re-transfer settings

Ribbon Type
Temperature
Speed (Front/Back)

5.1.2. Bend remedy

Temperature
Speed
Cooling Time
Note: Cooling Time is only available if temperature is not Off.

5.1.3. Ink settings

Ribbon Type
Note: The auto detection function will always show the currently mounted type of color ribbon.
Resin Black
Resin Black Mode
Special Ink: 1/2
(for future use)

5.1.4. Other settings

ISO Type
Card Type
Printer Stand By
Buzzer
Prima 3 Driver Manual
Counts per roll (1000, 750)
-3 (Low) ..Standard + 2 (High)
-10 (Slow) .. Standard .. +2 (Fast)
Off .. -5 (Low) .. Standard .. 0 (High)
-2 (Slow) .. Standard .. +2 (Fast)
0 sec .. 15 sec
YMCK, YMCK + PO, YMCKK
-3 (Thin) .. Standard .. +5 (Thick)
Normal .. Fine
-3 (Thin) .. Standard .. +3 (Thick)
HiCo or LoCo Magstripe Cards
Normal or Cybernetic Size (future use)
No .. 60 minutes
On or Off
45