Steps
1. Align the solid-state drive bracket to accommodate the M.2 2230 solid-state drive.
2. Replace the single (M2x3) screw to secure the solid-state drive module to the palm-rest and keyboard assembly.
Next steps
1. Connect the battery.
2. Install the
base
cover.
3. Follow the procedure in
Removing the M.2 2280 solid-state drive - SSD-1 - discrete
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the battery.
About this task
NOTE:
Slot one supports both M.2 2230 and M.2 2280 SSD.
The figure indicates the location of the M.2 2280 solid-state drive in slot one and provides a visual representation of the removal
procedure.
Steps
1. Remove the single screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly.
2. Slide and remove the solid-state drive module from the solid-state drive slot on the system board.
Installing the M.2 2280 solid-state drive - SSD-1 - discrete
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
34
Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.