Difficult Start Up; Stopping The Engine; Stand - Gilera SMT 50 Manual

Difficult start up

It may be engaged by thrusting in case it was necessary.
Insert the 2nd gear and thrust the vehicle with the clutch lever pulled. Once a sufficient
speed is reached, put pressure on the rear wheel and release the clutch suddenly,
repeat the procedures as necessary.

Stopping the engine (02_05)

To stop the engine, engage gear «1» in neutral position and turn the key switch anti-
clockwise.
02_05

Stand

Check the stand is completely unfold before resting the vehicle, so as to obtain an
optimum resting.
PLEASE, DO RIDE OFF WITH THE STAND UNFOLD.
24