Light Switch; Emergency Flashing Light Button - Gilera Fuoco 500ie LT Manual

Light switch (01_11)

When the light switch «H» is set to «0», the low-beam light is on. When set to «1»,
the high-beam light is activated. If the light switch «H» is pressed when set to «2», the
high-beam light is activated. The switch goes back to «0» automatically.
When the ignition key is set to «ON» and the vehicle is not running, only the tail light
is on.
When the ignition key is set to «ON» and the vehicle is running, the low-beam lights
will turn on two seconds after the ignition; when the high-beam lights turn on, the low-
beam lights turn off.
01_11

Emergency flashing light button (01_12)

It enables the activation of the 4 turn indicators simultaneously. The control «D» can
be enabled only with the key set to «ON», but once enabled, it keeps functioning even
if the key is set to «OFF» or «LOCK». To disable this function, simply turn the key
switch to «ON».
01_12
17