Mode* Button - Gilera Fuoco 500ie LT Manual

*MODE* button (01_05, 01_06)

Pushing the ''MODE'' «S» button for less than a second displays the following se-
quence of functions:
1. Trip odometer «A»
2. Trip odometer «B»
3. Ambient temperature «°»
Push the ''MODE'' «S» button for longer than 3 seconds to zero set the trip odometer.
01_05
UNIT OF MEASUREMENT SETTING
Press and hold the "MODE" «S» button for at least 3 seconds and at the same time
turn the ignition key to "on".
The icons "kmi" and "°E" will start flashing.
"Kmi" represents the combination of "km" (kilometres) and "mi" (miles)
"°E" represents the combination of "°C" (degrees Celsius) and "°F" (degrees Fahren-
heit).
01_06
By pushing the "MODE" «S» button for less than a second, the icons "km" and "mi"
are selected sequentially.
Push the "SET" button «M» to confirm the selection.
Now the ambient temperature icon "°C" or "°F" starts flashing.
By pushing the "MODE" «S» button for less than a second, the icons "°C" and "°F"
are selected sequentially.
Push the "SET" button «M» to confirm the selection.
14