Operation - Gilera Fuoco 500ie LT Manual

Operation

Each time the starter key «B» is removed while in the «OFF», or «LOCK» position,
the protection system activates the engine lock. Turning the key to "ON" disables the
engine lock, provided that the safety system recognises the code transmitted by the
key. If the code is not recognised, turn the key first to "OFF" and then to "ON"; if lock
persists, try again using the «A» MASTER key. If the engine cannot be started, contact
an Authorised Service Centre, which is provided with the electronic equipment re-
quired to detect and repair the system.
When supplementary keys are required, remember that the programming must be
performed on all the keys whether they are new or existing ones.
Contact an Authorised Service Centre and bring the «A» MASTER key and all
«B» starter keys that you own.
The codes of keys not submitted for the new storage procedure are deleted from the
memory. Any lost keys will therefore not be enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF THE VEHICLE IS SOLD, THE MASTER-HANDGRIP KEY (AS WELL AS THE
OTHER STARTER KEYS) AND THE «CODE CARD» MUST ALSO BE TRANS-
FERRED TO THE NEW OWNER.
21