U-Line CLR60 User Manual page 28

User's Manual
7. When water begins to flow
over the evaporator (approxi-
mately 3 minutes), add one
package
Machine
water reservoir.
8. Reinstall inside front cover.
9. When the
process stops (approximate-
ly 45 minutes) it may be
desirable to clean the stor-
age bin at this time (see
INTERIOR STORAGE BIN
CLEANING).
10. Move the cycle selector
switch to the ICE position to
resume ice production.
INTERIOR STORAGE BIN CLEANING
1. Disconnect power from the ice maker.
2. Open the door and remove any ice from the storage bin.
3. Wipe down the storage bin with a solution of non-abrasive mild
soap or detergent
Sanitize the bin with a solution of 1 tablespoon of bleach in 1 gal-
lon of warm water. Rinse thoroughly with clean water.
4. Check that all drain connections are in place.
5. Reconnect power to the unit.
of U-Line Ice
cleaner to the
self-cleaning
and warm water.
OVERFLOW
Figure 33
Rinse with clean water.
26
UL209