U-Line CLR60 User Manual page 26

User's Manual
INLET SCREEN CLEANING
The solenoid valve inlet screen
must be cleaned at least once each
year as follows:
1. Shut off the water at the water
supply valve.
2. Remove front access panel to
expose water solenoid valve.
3. Remove the entire hose con-
nector from the solenoid valve.
4. Use a tooth brush to clean
sediment from the inlet screen
(see Figure 31).
remove the screen.
5. Attach the hose connector to
the solenoid valve.
connector securely with a pli-
ers. Open the water supply
valve and check for leakage at
the hose connector.
AUTOMATIC CLEAN CYCLE
To maintain operational efficiency, clean the unit every six months
(depending on water conditions more or less frequent cleaning may be
necessary). If the ice maker requires more frequent cleaning, consult
a qualified plumber to test the water quality and recommend appropri-
ate treatment.
DO NOT
Tighten
!
WARNING
Wear rubber gloves and safety goggles and/or
face shield when handling Ice Machine Cleaner.
Figure 30
Figure 31
!
24
UL005A
UL204C