Ignition ACL LED Par 64 User Manual page 53

Symptom
The unit does not work, no light,
the display is dark
Apparently no function despite
proper power supply
No response to the DMX con‐
troller
Remedy
Check the mains connection and the main fuse.
Check whether the device is in DMX mode. If so, check
the unit in another mode.
1. Check the DMX connectors and cables for proper con‐
nection.
2. If the unit is in DMX mode with a DMX controller con‐
nected and turned on, the display shows 'Dmx In' . If it
doesn't, no valid DMX signal is received. Check whether
the DMX controller is switched on. Check the DMX con‐
nectors and cables for proper connection.
3. If the display shows 'Dmx In' but there is still no
response, check the address settings and the DMX
polarity.
Troubleshooting
ACL LED Par 64
53
LED PAR